Featuring a 6-1/2” woofer with a polypropylene cone and rubber surround and a 1” fabric dome tweeter, the G62 is designed to make installation easy and to provide the market leading performance you’ve come to expect from Audiofrog. 

The woofer’s steel basket is shallow enough to fit nearly every factory-provided 6” location using the included multiadapter. The height of the tweeter above the surround edge has been minimized so that the G62 can be easily installed in factory locations under factory grilles. 

Since 6” coaxials are most often mounted in the factory location at the bottom of the front and/or rear doors or in the package tray in the rear of a sedan, the frequency response has been designed to compliment those locations. At high frequencies, the output of the speaker rises to counteract the off-axis attenuation caused by the locations. The result is crisp and clear high frequencies even in the factory locations—a clear upgrade.

• Rigid and shallow steel woofer basket
• Parabolic polypropylene woofer cone
• Nitrile butadiene rubber surround
• 1” (25mm) copper voice coil on Kapton® former
• Flat progressive Nomex® spider
• Ferrite magnet
• 1” (25mm) fabric dome neodymium tweeters
• Tweeters include reflection absorbing and diffusing foam pad
• Convenient and innovative tweeter flush mounting kit
• In-line crossovers with speaker connectors already installed
• 12dB/octave tweeter high pass filter with protection circuit
• 6dB/octave woofer low pass filter
• Multiadapter included for factory fitment in many cars

Specifications:

• Nominal Impedance: 4Ω
• RMS Power Handling: 50 W (with crossover)
• Peak Power Handling: 120 W (with crossover)
• Frequency Response:50 Hz – 20 kHz
• Sensitivity (2.83 V/1 M): 89 dB
• Recommended Amplifier RMS Power Range: 15 W – 75 W

Dimensions:

• Cut-out Diameter (woofer): 132.5 mm (5-7/32”)
• Overall Diameter (woofer): 158.2 mm (6-15/64″)
• Overall Diameter Including Mounting Tabs (woofer): 166 mm (6-17/32″)
• Mounting Depth (woofer): 51.2 mm (2-1/64″)
• Mounting Height (woofer): 12 mm (15/32″)
• Cut-out Diamater (tweeter flush mount): 48 mm (1-57/64”)
• Overall Diameter (tweeter flush mount): 54 mm (2-1/8”)
• Mounting Depth (tweeter flush mount): 13 mm (33/64”)

Theile & Small Parameters(Woofer):

• Revc: 2.25 Ω
• Levc@1kHz: 0.13 mH
• Sd: 143.14 cm²
• Mmd: 11.8 g
• Mms: 12.37 g
• Cms: 317 µM/N
• Vas: 9.12 liters
• Fs: 80.39 Hz
• BL: 3.91 TM
• Qms: 7.89
• Qes: ..92
• Qts: 0..83
• Xmax (1-way linear): 4 mm (5/32”)
• Basket Displacement: 0.24 liters (0.008 ft³)

Theile & Small Parameters(Tweeter):

• Fs: 1.5 kHz
• Revc: 4 Ω

Frequency Response Graph:

Impedance Graph:

GS60S Owner’s Manual