GS682 6″x 8″ PREMIUM GRADE AUTOMOTIVE FULL RANGE LOUDSPEAKER
Designed as an easily installed premium upgrade, the GS682 includes a proprietary injection-molded ABS and fiberglass vented basket with mounting tabs to fit many factory 6×8” and 5×7” locations. Ease of installation is ensured with a low profile 1” fabric dome neodymium tweeter that is sure to fit under factory grilles. The kit includes a removable gasket for mounting the speaker under the baffle.
The tweeter faceplate includes a small waveguide designed to boost the tweeter’s low frequencies and ensure a smooth transition to the midrange. That transition is also controlled by a 12dB/octave high pass filter and 6dB/octave low pass filter. The entire crossover network is mounted to a PC board integrated into the basket, which also secures the terminals.
The GS682 woofer includes a 1” copper voice coil wound on a Kapton® former for superior power handling.
- Injection molded ABS plastic and fiberglass vented basket
- Parabolic polypropylene cone
- Nitrile butadiene rubber surround
- 1” (25mm) copper voice coil on Kapton® former
- Flat progressive Nomex® Spider
- Ferrite magnet
- 1” (25mm) fabric dome neodymium tweeter
- Tweeter includes reflection absorbing and diffusing foam pad
- Low-profile tweeter waveguide helps to provide smooth transition to the midrange
- Fast-on terminals secured with integrated PC board
- Integrated passive crossover (12dB/octave high pass and 6dB/octave low pass)
Specifications:
- Nominal Impedance: 4Ω
- RMS Power Handling: 70 W (with recommended crossover)
- Peak Power Handling: 200 W (with recommended crossover)
- Frequency Response: 47 Hz – 20 kHz
- Sensitivity (2.83 V/1 M): 89 dB
- Recommended Amplifier
- RMS Power Range: 15 W – 75 W
Dimensions:
Frequency Response Graph:
Thiele & Small Parameters:
- Revc: 2.35 Ω
- Levc@1kHz: 0.14 mH
- Sd: 163 cm²
- Mmd: 14.3 g
- Mms: 15.54 g
- Cms: 351.26 µM/N
- Vas: 13.33 liters
- Fs: 68 Hz
- BL: 4.05 TM
- Qms: 6.66
- Qes: 0.95
- Qts: 0.83
- Xmax (1-way linear): 4 mm (3/16”)
- Basket Displacement: 0.37 liters (0.013ft³)